High-speed high-speed machine high precision, fast, good stability has been widely used by many customers, high-speed high-ray machine for this heavy machine, we should pay attention to the use of security. Even skilled operators can not be taken lightly. The following by the World technical staff for everyone to introduce high-speed high-light machine operation Note:

High speed high light machine

  
1, in the processing of metal must be added cutting fluid, cutting fluid must rush to the tool.

2, is strictly prohibited to place any items on the machine table or beam; prohibit the handle on the body leaning on the machine bed.

3, is strictly prohibited, hit the spindle motor cover. Do not knock the chuck when unloading.

4, start to polish to slightly lift the nose, until the normal speed and then put down the nose, polished, use dust to push the ground clean, and promptly clean the polishing pad and the machine.

5, according to the provisions of cleaning all the tools, high-speed high-light machine and properly placed.

The above five aspects of the operation is concerned about the points analysis, to comply with high-speed high-light machine operating code to ensure normal work, so the daily use must comply with the relevant rules.